Watmough, Shaun
Acidification of lakes in northern Saskatchewan: An assessment of sensitivity and risk from acidic deposition
The emission of acid precursors by large point sources in Western Canada
(such as the Athabasca Oil Sands Region) has prompted studies into the possible impact to downwind aquatic and terrestrial ecosystems. Sensitivity of catchments to acidic deposition was estimated for the total lake population of northern Saskatchewan (n=89,947) using regression kriging. Under the Steady State Water Chemistry model, a range of 12-15% of the total catchment population was predicted to be in exceedance of critical loads under 2006 deposition levels and 6% of catchments were estimated to be very sensitive (pH below 6 and acid neutralizing capacity, alkalinity, calcium below 50 eqL-1). Temporal changes in soil and water chemistry estimated for 18 Alberta and Saskatchewan catchments using the Very Simple Dynamic and PROFILE models showed that changes in soil base saturation and lake acid neutralizing capacity between 1850 and 2100 were slight, declining 0.8% and 0.9% by 2012, respectively.
Author Keywords: acidification, critical loads, exceedance, PROFILE, regression kriging, VSD
An Assessment of Spatial Trends in the Accumulation of Oil Sands Related Metals in the Clearwater River Valley and Temporal Trends in Six Northern Saskatchewan Lakes
The objective of this thesis was to assess current spatial trends and historic trends in the accumulation of trace metals related to the Athabasca Oil Sands Region (AOSR). The AOSR hosts some of the largest industrial developments in Canada, yet relatively little is known about the transport and fate of trace metal emissions from the region – particularly in the relatively remote areas to the east of the AOSR. Lichens are widely used as biomonitors and are employed in this thesis to assess the range of metals deposition within the Clearwater River and Athabasca River Valleys. Lake sediment cores can retain a historical record of the long-range transport and deposition of metals but can also respond to large regional metal emissions sources. This thesis used lake sediment cores to assess temporal trends in metals accumulation in six road accessible lakes in NW Saskatchewan that are likely to be used by local residents. Results show that metal concentrations (V, Co, Cu, Ni, Pb, Zn, Zr and Cd ) in lichen decline exponentially with distance from the AOSR and approach background levels within a few kilometers . Results from lake sediment cores show that there was no evidence that metal concentrations had increased due to industrial activities in the AOSR.
Author Keywords: Air Emissions, Lakes, Lichens, Oil Sands, Saskatchewan, Trace Metals
Estimating mineral surface area and acid sensitivity of forest soils in Kitimat, British Columbia
In 2012, the Rio Tinto aluminum smelter in Kitimat, British Columbia increased sulphur dioxide (SO2) emissions from 27 to 42 tonnes/day. An initial study was conducted to investigate the effect of the increased sulphur (S) deposition on forest soils. A key uncertainty of the initial study was mineral surface area estimations that were applied to critical load calculations. The current study investigates the effect of organic matter (OM) removal techniques on mineral surface area and the ability to predict mineral surface area using pedotransfer functions (PTFs). Mineral surface area was measured on bulk soil samples using BET gas-adsorption. Organic matter was removed from soil samples prior to surface area measurements using a sodium hypochlorite treatment (NaOCl), loss on ignition (LOI) and no treatment. Removal techniques were found to affect surface area measurements; decreasing in the order of LOI> untreated> NaOCl. Particle-size based PTFs developed from other regions were not significantly correlated with measured surface area. A regionally-specific particle-size based function had stronger predictive value of surface area measurements (adjusted R2=0.82). The PTF that best reflected surface area measurements of bulk soil for the Kitimat area used particle-size data as well as kaolinite, the most abundant clay mineral in the region. Surface area values estimated using the particle-size PTF were applied to the PROFILE model to calculate weathering rates. Weathering rates were then input to critical load calculations using steady-state mass balance. These estimates predicted that none of the 24 measured sites are receiving SO2 deposition in exceedance of their critical load.
Author Keywords: acid deposition, critical loads, mineral surface area, mineral weathering, pedotransfer functions, PROFILE