Graduate Theses & Dissertations

Distribution of Cluster Fly Species (Pollenia, spp. Diptera
This thesis looks at the genus Pollenia: historically where they were first introduced into Canada and spatially, where they are found now. This project involved me identifying 2211 files, sorted from the 3 years of field specimens obtained in 2011, 2012, 2013. P. pediculata was the most abundant and widespread, yielding 1272 specimens out of 2211, and it was found in all provinces sampled. The previous understanding of all Pollenia specimens as being P. rudis appears to be incorrect both in terms of actual number of species – which is known – and how prevalent it is. P. rudis comprised only 20% of the entire collection. The least common was P. griseotomentosa, occurring as 45 of 2211, or 2%. I found new eight first provincial records: four species in Alberta (P. angustigena, P. labialis, P. rudis, P. vagabunda) , one species for Saskatchewan (P. pediculata), two for New Brunswick (P. griseotomentosa, P. labialis), and one for Nova Scotia (P. labialis). P. labialis was new to three provinces, the other species to one province each. Author Keywords: Calliphoridae, Canada, Cluster Fly, Distribution, Pollenia, Provincial Records
Factors Controlling Peat Chemistry and Vegetation Composition in Sudbury Peatlands after 30 Years of Emission Reductions
Peatlands are prevalent in the Sudbury, Ontario region. Compared with the well documented devastation to the terrestrial and aquatic ecosystems in this region, relatively little work has been conducted on the peatlands. The objective of this research was to assess factors controlling peat and plant chemistry, and vegetation composition in 18 peatlands in Sudbury after over 30 years of emission reductions. Peatland chemistry and the degree of humification varies considerably, but sites closer to the main smelter had more humified peat and the surface horizons were enriched in copper (Cu) and nickel (Ni). Copper and Ni concentrations in peat were significantly correlated with Cu and Ni in the plant tissue of leatherleaf, although the increased foliar metal content did not obviously impact secondary chemistry stress indicators. The pH and mineral content of peat were the strongest determining factors for species richness, diversity and community composition. The bryophyte communities appear to be acid and metal tolerant, although Sphagnum mosses are showing limited recovery. Author Keywords: anthropogenic emissions, bryophytes, community comspoition, heavy metals, peatlands, wetland vegetation
Abundance and Distribution of Microplastics in Lake Scugog Catchment, Ontario
Plastic pollution is a growing concern, owing to its durability, ubiquity, and potential health impacts. The overall objective of this study was to assess the abundance and distribution of microplastics within Lake Scugog catchment, Ontario. This was fulfilled through two tasks (i) the development of a microplastic particle budget for the lake catchment, and (ii) the determination of the dry deposition of atmospheric microplastics in Port Perry, Ontario. The total input of microplastics into Lake Scugog (atmospheric deposition and stream inflow) was 2491 x106 mp/day, while the output (lake outflow and sedimentation) was 1761 x106 mp/day, suggesting that 29% of inputs were retained in the lake. The dry deposition of microplastics in Port Perry was 1257 mp/m2/day, which was high when compared to bulk deposition (37 mp/m2/day) in the same area. By quantifying the major pathways of microplastics better management techniques can be implemented. Author Keywords: Catchment, Dry Deposition, Microplastics, Ontario, Particle Budget, Plastic pollution
Investigation of Air Recirculation and Thermal Efficiency within a Climate Controlled Passage
Historically, entrances have been used for passage between two separate temperature environments, such as moving from inside to outside of a building. Energy loss through entrances is a cause for concern, as it has been known to increase energy consumption to replace the lost energy; and with the exchange of air masses and cold air entering the building, human discomfort may occur. In this research, thermal efficiency and air circulation within a Conventional Entrance (CE) and Climate Controlled Passage (CCP) are compared. A small scale model of the CE and CCP was constructed to examine forty-eight energy exchange conditions, emulating those found through an entrance between a temperature controlled lab and the model. Instruments such as a power meter, a flow explorer laser Doppler anemometer, and thermocouples were used to measure and compare the energy consumption, velocity vectors, and temperature energy within the entrance. Results indicate that the CCP did retain thermal energy compared to the CE. The CE developed sloped isotherm lines and air flow that enabled and maintained thermal exhaust. Conversely, the CCP developed horizontal isotherm lines and a two-layer density current to recirculate and retain thermal energy. The research demonstrates that it is possible to increase energy efficiency of entrances in many applications. Author Keywords: Air Recirculation, Building, Entrance, Oven, Thermal Energy Efficiency, Two-layer Density Current

Search Our Digital Collections

Query

Enabled Filters

  • (-) = Environmental studies
  • (-) = Environmental and Life Sciences
  • (-) = Master of Science
  • (-) ≠ Nadon, Mallory Jean

Filter Results

Date

2004 - 2024
(decades)
Specify date range: Show
Format: 2024/04/25