Graduate Theses & Dissertations

Molecular Composition of Dissolved Organic Matter Controls Metal Speciation and Microbial Uptake
Aquatic contaminant mobility and biological availability is strongly governed by the complexation of organic and inorganic ligands. Dissolved organic matter (DOM) is a complex, heterogeneous mixture of organic acids, amino acids, lipids, carbohydrates and polyphenols that vary in composition and can complex to dissolved metals thereby altering their fate in aquatic systems. The research conducted in this doctoral dissertation addresses 1) how DOM composition differs between phytoplankton taxa and 2) how DOM composition affects metal speciation and its subsequent microbial bioavailability in laboratory and field conditions. To accomplish this, a series of analytical methods were developed and applied to quantify thiols, sulphur containing DOM moieties, and the molecular composition of DOM. The works presented in this thesis represents one of the first comprehensive and multipronged analyses of the impact of phytoplankton metabolite exudates on microbial metal bioavailability. This dissertation demonstrated the analytical versatility of high-resolution mass spectrometry as a tool for compound specific information, as well as having the capabilities to obtain speciation information of organometallic complexes. The work presented in this PhD strengthens the understanding compositional differences of both autochthonous and allochthonous DOM and their effects on metal biogeochemistry. Author Keywords: Dissolved Organic Matter, Mercury, Metal Accumulation, Phytoplankton, Spring Melts, Thiol
Identification and Quantification of Organic Selenium Species Produced by Microbiological Activity in Freshwater Environments
Despite being an essential nutrient at trace levels, selenium can be devastating to aquatic environments when present in excess. There is no apparent correlation between total aqueous selenium concentrations and observed toxic effects because bioaccumulation varies over several orders of magnitude depending on the chemical species of selenium and the biological species present in the lowest trophic level of the aquatic food chain. Despite being used in toxicity models due to its high bioavailability, free selenomethionine had not been found previously in the environment outside of a biological entity. Here, it is confirmed that selenomethionine is produced during the biological treatment of selenium-contaminated wastewater, and released in the effluent along with other discrete organic selenium species, including selenomethionine oxide. This identification followed the development of a rigorous preconcentration and cleanup procedure, allowing for the analysis of these organic selenium species in high-ionic strength matrices. A newly optimized anion-exchange chromatographic separation was coupled to inductively-coupled plasma mass spectrometry for the simultaneous quantification of these organic selenium species along with the more ubiquitous selenium oxyanions, selenite and selenate. This separation method was also coupled to electrospray tandem mass spectrometry for structural confirmation of selenomethionine and selenomethionine oxide. High resolution orbitrap mass spectrometry was used to identify another oxidation product of selenomethionine – a cyclic species which was tentatively identified, by coelution, in a selenium-contaminated river water sample. The production and release of selenomethionine, selenomethionine oxide, Se-(methyl) selenocysteine, and methyl selenic acid were observed for various laboratory algal cultures. Once the presence of free selenomethionine in a water system was confirmed, factors affecting its uptake into algal cultures were examined. The uptake of selenomethionine into Scenedesmus obliquus was noted to be significantly higher under low nitrate conditions, where it was incorporated into selenium-containing proteins more readily than at higher nitrate conditions where other metabolites were produced. With the increasing popularity of biological treatment systems for the remediation of selenium-contaminated waters, these observations, combined with existing knowledge, could be used to make predictions regarding the potential toxicity of selenium in various environmental scenarios. Author Keywords: bioremediation, electrospray mass spectrometry, inductively-coupled plasma mass spectrometry, selenium, selenoamino acids, selenomethionine
Size and fluorescence properties of allochthonous dissolved organic matter
Dissolved organic matter (DOM) is a mixture of molecules with dynamic structure and composition that are ubiquitous in aquatic systems. DOM has several important functions in both natural and engineered systems, such as supporting microorganisms, governing the toxicity of metals and other pollutants, and controlling the fate of dissolved carbon. The structure and composition of DOM determine its reactivity, and hence its effectiveness in these ecosystem functions. While the structure, composition, and reactivity of riverine and marine DOM have been previously investigated, those of allochthonous DOM collected prior to exposure to microbes and sunlight have received scant attention. The following dissertation constitutes the first in-depth study of the structure, composition, and reactivity of allochthonous DOM at its point of origin (i.e. leaf leachates, LLDOM), as detected by measuring its size and optical properties. Concomitantly, novel chemometric methods were developed to interpret size-resolved data obtained using asymmetrical flow field-flow fractionation, including spectral deconvolution and the application of machine learning algorithms such as self-organizing maps to fluorescence data using a dataset of more than 1000 fluorescence excitation-emission matrices. The size and fluorescence properties of LLDOM are highly distinct. Indeed, LLDOM was correctly classified as one of 13 species/sources with 92.5% accuracy based on its fluorescence composition, and LLDOM was distinguished from riverine DOM sampled from eight different rivers with 98.3% accuracy. Additionally, both fluorescence and size properties were effective conservative tracers of DOC contribution in pH-controlled mixtures of leaf leachates and riverine DOM over two weeks. However, the structure of LLDOM responded differently to pH changes for leaves/needles from different tree species, and for older needles. Structural changes were non-reversible. Copper-binding strength (log K) differed for the different fluorescent components of DOM in a single allochthonous source by more than an order of magnitude (4.73 compared to 6.11). Biotransformation preferentially removed protein/polyphenol-like fluorescence and altered copper-binding parameters: log K increased from 4.7 to 5.5 for one fluorescent component measured by fluorescence quenching, but decreased from 7.2 to 5.8 for the overall DOM, as measured using voltammetry. The complexing capacity of DOM increased in response to biotransformation for both fluorescent and total DOM. The relationship between fluorescence and size properties was consistent for fresh allochthonous DOM, but differed in aged material. Since the size and fluorescence properties of LLDOM are strikingly different from those of riverine DOM, deeper investigation into transformative pathways and mixing processes is required to elucidate the contribution of riparian plant species to DOM signatures in rivers. Author Keywords: Analytical chemistry, Chemometrics, Dissolved organic matter (DOM), Field-flow fractionation, Fluorescence spectroscopy, Parallel factor analysis (PARAFAC)
Purification and Identification of Selenium-containing C-phycocyanin from Spirulina
Selenium is an essential trace nutrient to many organisms, yet in high concentrations it is toxic. Organic selenium is more bioavailable to aquatic biota than inorganic selenium, but is usually found in much lower concentrations. Algae are known to biotransform inorganic selenium into several organo-selenium compounds, but it is unknown whether any of these bioaccumulate in the food chain. In this study, selenium was incorporated into the methionine residues of an algal photosynthetic protein, c-phycocyanin from Spirulina spp. The extent of selenium incorporation was quantified by inductively coupled plasma-mass spectrometry (ICP-MS), and the protein was identified using electrospray mass spectrometry (ES-MS). C-phycocyanin was isolated and purified from Spirulina with a final recovery of 20-30 % of the total c-phycocyanin present. Selenomethionine replaced 92.8% ± 1.22 of the methionine residues in c-phycocyanin when grown in 2.5 ppm sodium selenite. ES-MS was used to obtain protein spectra, and pure c-phycocyanin was identified. Data of full scans provided estimated masses of both protein subunits--α-chain measured at 18,036 Da; β-chain measured at 19,250 Da--close to the theoretical masses. Protein fragmentation by collision-induced dissociation and electron capture dissociation provided approximately 52 % amino acid sequence match with c-phycocyanin from Spirulina platensis. This study demonstrates the incorporation of selenium into an algal protein, and the identification of c-phycocyanin using electrospray ionization-mass spectrometry. Author Keywords:
Investigating the sources and fate of monomethylmercury and dimethylmercury in the Arctic marine boundary layer and waters
Monomethylmercury (MMHg), the most bioavailable form of mercury (Hg) and a potent neurotoxin, is present at elevated concentrations in Arctic marine mammals posing serious health threats to the local populations relying on marine food for their subsistence living. The sources of MMHg in the Arctic Ocean surface water and the role of dimethylmercury (DMHg) as a source of MMHg remain unclear. The objective of this research was to determine the sources and fate of methylated Hg species (MMHg and DMHg) in the marine ecosystem by investigating processes controlling the presence of methylated Hg species in the Arctic Ocean marine boundary layer (MBL) and surface waters. A method based on solid phase adsorption on Bond Elut ENV was developed and successfully used for unprecedented measurement of methylated Hg species in the MBL in Hudson Bay (HB) and the Canadian Arctic Archipelago (CAA). MMHg and DMHg concentrations averaged 2.9 ± 3.6 (mean ± SD) and 3.8 ± 3.1 pg m-3, respectively, and varied significantly among sampling sites. MMHg in the MBL is suspected to be the product of marine DMHg degradation in the atmosphere. MMHg summer (June to September) atmospheric wet deposition rates were estimated to be 188 ± 117.5 ng m-2 and 37 ± 21.7 ng m-2 for HB and CAA, respectively, sustaining MMHg concentrations available for bio-magnification in the pelagic food web. The production and loss of methylated Hg species in surface waters was assessed using enriched stable isotope tracers. MMHg production in surface water was observed from methylation of inorganic Hg (Hg(II)) and, for the first time, from DMHg demethylation with experimentally derived rate constants of 0.92 ± 0.82 x 10-3 d-1 and 0.04 ± 0.02 d-1 respectively. DMHg demethyation rate constant (0.98 ± 0.51 d-1) was higher than that of MMHg (0.35 ± 0.25 d-1). Furthermore, relationships with environmental parameters suggest that methylated Hg species transformations in surface water are mainly biologically driven. We propose that in addition to Hg(II) methylation, the main processes controlling MMHg production in the Arctic Ocean surface waters are DMHg demethylation and deposition of atmospheric MMHg. These results are valuable for a better understanding of the cycle of methylated Hg in the Arctic marine environment. Author Keywords: Arctic Ocean, Atmosphere, Demethylation, Dimethylmercury, Methylation, Monomethylmercury
effects of environmental variables and dissolved organic matter characteristics on the diffusion coefficient of dissolved organic matter using diffusive gradients in thin films
The efficacy of the diffusive gradients in thin films (DGT) passive samplers to provide accurate measurements of free metal ions and those complexed with dissolved organic matter (DOM) was investigated. DOM controls the diffusive properties of DOM-complexed metal species in natural systems. Knowing the diffusion coeiffiecent (D) for DOM of different molecular weights (MW) and the major environmental variables influencing D is critical in developing the use of DGT passive samplers and understanding labile species. D and MW were determined for natural and standard DOM. No noticeable changes in DOM MW were observed during the diffusion process, suggesting that DOM remains intact following diffusion across the diffusive gel. Data analysis revealed that MW had the greatest influence on D, with a negative relationship between D and MW, except in tidal areas where ionic strength influence on D was significant. This study provides further characterization of the variables influencing D using the DGT technique. Author Keywords: Diffusion coefficient, Diffusive gradients in thin films, Dissolved organic matter, Flow field-flow fractionation, Principal Component Analysis, UV-Vis Spectroscopy

Description

Graduate student theses produced at Trent University. You may also browse theses and dissertations by year, program, or author.

In collections

Search Our Digital Collections

Query

Enabled Filters

  • (-) ≠ Sager
  • (-) ≠ Baldwin
  • (-) = Analytical chemistry
  • (-) ≠ Hintelmann
  • (-) = Biogeochemistry

Filter Results

Date

2004 - 2024
(decades)
Specify date range: Show
Format: 2024/04/18

Collection

Author Name

Name (Any)

Degree

Degree Discipline

Subject (Topic)